Diagrams within this manual may not be drawn proportionally. It reduces the load on the winch, allowing it to work longer with less heat buildup. To use the wired remote, attach the remote cable to the remote socket on the control box. Control Box /Solenoid Box: Accessories For Badland Winches: 1. Heres how you can do that: Thats all there is to it. Whether your vehicle is stuck in a pit or a muddy pool, having a winch with you can be of great help. To use the wireless remote, connect the remote controller switch to your solenoid box for winch operation. You may wish to keep the engine running while using this winch, to continually recharge the battery. Stay alert, watch what you are doing and use common sense when operating. Anything below IP67 is prone to damage from rain and submerge. , connect the remote control box to the solenoid box. Far-right black wire needs to be connected to the yellow terminal on the motor that is on the front side of the winch. Distractions can cause you to lose control. The red indicator light will flash during the operation. Email our technical support at: productsupport@harborfreight.com. If not available , then a new controller from another winch could work. 1. Recover a stuck vehicle, haul timber or load a boat with this powerful auto winch. Wear restrictive hair covering to contain long hair. Only use a 12V automotive (or equivalent) battery, in good condition. If it works with a 5% duty cycle at its maximum load, it must rest for at least 14 minutes and 15 seconds after every 45 seconds of use. Insulate all exposed wiring and terminals after installation. Use the included brackets (attached to the bottom of the Solenoid Box) to mount the solenoid assembly to the tie bars of the winch. Attach the Circuit Breaker to the Positive Terminal on the battery. Off-Road Vehicle Winch with Automatic Load-Holding Brake Check latest price Main Features Supports up to 12,000 pounds Automatic Load-Holding Brake 00 horsepower The three-stage planetary gear system 5% duty cycle rating Fairlead Roller with nylon bushings Automatic load-holding brake In-Line circuit breaker Thank You Repair or replace solenoid. Thanks Clarence. ), Use winch only in underwind orientation. The dealer had put the solenoid and such all in the battery box in the rear of the bike, which made perfect sense as its pretty well protected from the elements in there. Fortunately, some winch brands offer winch replacement parts, some of which are compatible with Badland 2500 lb winches. This does not mean that it is necessarily a Badland 2500 winch part, but it is a very viable replacement. Most of the Badland winches carry the same ideal wiring pattern. The series-wound motor stays cool while the 3-stage planetary gear system provides fast line speed. Do not use the winch if the wire rope is frayed, kinked or damaged. Badland is a winch brand that provides good quality winches. tension before use. Tools required for assembly and service may not be included. 12,000 lb ZXR Badland Winch Wiring Instructions FSRD 12.8K subscribers Subscribe 495 61K views 2 years ago Here is an instructional video on how top wire up a 12,000 lb ZXR Badland.
Boca Reservoir Webcam,
Does Coach Restock Sold Out Items,
Thompson Cigar Humidor Special,
Should I Move To Philadelphia Quiz,
Articles B